ION L4-2.2L VIN F (2004)
Important: Do not attempt to separate the joint using a wedge type tool.
8. Use the SA91100C to separate the outer tie rods from the steering knuckles.
9. Remove the steering gear bolts.
10. Carefully remove the steering gear from the frame and the vehicle through the LH wheel opening.
Installation Procedure
1. Install the steering gear to the frame through the LH wheel opening.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the steering gear bolts.
-
Tighten the bolts to 110 Nm (81 ft. lbs.).
