ION L4-2.2L VIN F (2004)
Suspension Travel Bumper: Service and Repair
Spring Bumper Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting
2. Lower the rear axle in order to gain access to the top portion of the rear springs.
3. Remove the upper spring seat/jounce bumper from the spring, while leaving the lower spring seat on the axle.
Installation Procedure
Important: The rear springs are indexed with the colored tag toward the rear of the vehicle. No up/down or side to side orientation is required.
1. Install the upper spring seat/jounce bumper on the spring.
