ION L4-2.2L VIN F (2004)
1. Install the cooler line assembly to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the cooler line retaining nut at the transmission.
^
Tighten the lines to 7 Nm (62 inch lbs.).
3. Connect the transmission cooler lines to the radiator.
^
Tighten the nut to 16 Nm (12 ft. lbs.).
Important: Do not use ATF P/N 21005966 or P/N 21019223, these fluids are not compatible with this transmission. Use Saturn P/N 22689186.
4. Add fluid to the transmission as necessary.
5. Start the engine a check for leaks.
