ION L4-2.2L VIN F (2004)
6.
Place the front differential carrier and the front differential transfer gear into the housing.
7.
Rotate the differential housing several times in both directions to check for knocking, gear bind or movement caused by small areas of damage
(nicks/chips) on the gears. If the gears do not rotate smoothly, replace the differential carrier and the transfer gear. Refer to Front Differential
Carrier Removal and Front Differential Transfer Gear Removal in SI.
8.
Re-assemble the transaxle with a new case cover assembly. Refer to Case Cover Assembly Installation in SI.
9.
Flush the cooler lines using the flushing procedures in Corporate Bulletin Number 03-07-30-022.
10.
Install the transaxle in the vehicle. Refer to Transmission Replacement in SI.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
