saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5141 > < A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5139
Page 5
background image

Parts Information

Important:

Not all parts listed below are needed for procedure. Refer to SI and the appropriate Parts and Illustration catalog to ensure correct and current parts
are being used for each model transaxle.

Claim Information

To receive credit for this repair during the warranty coverage period, submit a claim through the Saturn Dealer System as follows:

^

For vehicles that have line pressure readings within specification, and the condition is or is not present:

^

Claim K6400 (Oil Pressure Test), and relate any diagnostics and/or labor operations for replaced parts.

^

For vehicles that have line pressure readings below specification, but all flex plate washers are present:

^

Claim K6400 (Oil Pressure Test) and J4640 (Motor Assembly, Starter - R&R or Replace). An "add time" condition is provided to inspect flex plate
bolts and washers. Relate any further diagnostics and/or labor operations for replaced parts.

^

For vehicles that have to be repaired due to missing flex plate washer(s):

^

K7800 (Transaxle Case - R&R or Replace). An "add time" condition is provided to check transaxle line pressure testing.

A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5141 > < A/T - No Shift or Movement/ SES Lamp ON/DTC P0741|Page 5139