ION L4-2.2L VIN F (2004)
2. Install the control valve body cover (2).
Important: Use LOCTITE(R) 242 thread sealer on ALL bolt threads.
3. Install the 9 control valve body cover bolts/screws.
Notice: Refer to Fastener Notice in Service Precautions.
4. Tighten the 9 control valve body bolts/screws in sequence.
^
Tighten the control valve body cover bolts/screws to 13 Nm (10 ft. lbs.).
5. Install the transaxle oil cooler lines to the transaxle.