ION L4-2.2L VIN F (2004)
Important: Excessive amounts of' lubricant on the input shaft splines can contaminate the clutch disc and cause clutch shudder.
1. Lubricate the inside diameter of the bearing with Saturn P/N 21005995, or equivalent.
2. Install the clutch actuator cylinder to the transmission.
Notice: Refer to Fastener Notice in Service Precautions.
3. Install the clutch actuator cylinder bolts
^
Tighten the bolts to 10 Nm (89 inch lbs.).
4. Install the upper line release bolt.
^
Tighten the bolt to 10 Nm (89 inch lbs.).
5. Install the transmission.
6. Connect the clutch actuator cylinder line.
7. Bleed the hydraulic system.