ION L4-2.2L VIN F (2004)
12.
Slide the grey locking clip in order to lock the connector in place.
13.
Install the manual shaft detent assembly and bolt on the control valve body assembly.
Tighten
Tighten the bolt to 11 N.m (8 ft-lbs).
12.
Slide the grey locking clip in order to lock the connector in place.
13.
Install the manual shaft detent assembly and bolt on the control valve body assembly.
Tighten
Tighten the bolt to 11 N.m (8 ft-lbs).