ION L4-2.2L VIN F (2004)
Notice: Refer to Fastener Notice in Service Precautions.
8. Tighten the park/neutral position switch bolt and stud.
^
Tighten the bolt and stud to 25 Nm (18 ft. lbs.).
9. Install the transmission control lever (2) and nut (1).
^
Tighten the nut to 16 Nm (12 ft. lbs.).
10. Connect the shift cable to the transmission control lever.
11. Verify the park/neutral position switch adjustment by starting the vehicle in all ranges. If the transmission starts in any range other than park or
neutral, readjust the park/neutral position switch.