ION L4-2.2L VIN F (2004)
Transmission Speed Sensor: Service and Repair
Input and Output Speed Sensor Assembly Replacement
Removal Procedure
1. Remove the Control Valve body assembly.
2. Remove the 2 bolts and the input and output speed sensor assembly from the transmission case assembly.
Installation Procedure
Notice: Refer to Fastener Notice in Service Precautions.
1. Install the input and output speed sensor assembly and the 2 bolts on the transmission case assembly.
^
Tighten the bolts to 11 Nm (8 ft. lbs.).
2. Install the Control Valve body assembly.
