saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Front Side Door Window Regulator Replacement (Manual)|Page 14006 > < Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 14003
Page 1
background image

Front Door Window Regulator: Service and Repair
Front Side Door Window Regulator Replacement (Manual)

Front Side Door Window Regulator Replacement (Manual Regulator)

Removal Procedure

1.  Position the window to the three quarter down position.
2.  Remove the window crank handle.
3.  Remove the door trim panel.
4.  Remove the water deflector in order to access the window regulator.
5.  Remove the front door speaker (2)

6.  Disengage the door window to the regulator sash channel clips (2), separating the door window from the sash channel.
7.  Push the window to the closed position and tape in place.

8.  Remove the rear manual window regulator rear bolt. Loosen the other four bolts.
9.  Remove the manual window regulator from the door (1).

Installation Procedure

1.  Loosely install the 4 forward bolts into the manual window regulator assembly.
2.  Position the manual window regulator in the door (1). Load the regulator through the rear hole (1). Access the regulator through the speaker hole

(2).

Notice:  Refer to Fastener Notice.

Front Side Door Window Regulator Replacement (Manual)|Page 14006 > < Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 14003