ION L4-2.4L (2007)
7. On the sedan, pull the lower clips to disengage the clips from the center pillar garnish molding.
8. Remove the carpet from the vehicle.
Installation Procedure
Caution: In order to avoid personal injury or vehicle damage when you repair or replace the carpet, use the same thickness and material
size as the original installation. Always return the carpet to the original location.
1. Position the carpet in the vehicle. Align the front holes over the weld studs in the floor pan. Ensure that the carpet is lying properly over the
console area. Tuck the carpet behind the H brace. Fit the carpet over all of the rear seat heat ducts.
2. On the sedan, tuck the carpet edge under the center pillar lower trim. Push the clips to engage the clips to the lower trim.
3. Install the rear seat cushion.
