ION L4-2.4L (2007)
Trim Panel: Service and Repair
Garnish Molding Replacement - Center Pillar Lower
Garnish Molding Replacement - Center Pillar Lower
Removal Procedure
Caution: Refer to Restraint System Service Precautions.
Caution: In order to prevent SIR deployment, personal injury, or unnecessary SIR system repairs, do not strike the door or the door
pillar in the area of the side impact sensor (SIS). Turn OFF the ignition and remove the key when performing service in the area of the
SIS.
1. Disable the SIR. Refer to SIR Disabling and Enabling.
2. Pull to remove the rear carpet retainer.
3. Pull to disengage the rearward clips from the front carpet retainer.
4. Remove the anchor bolt from the front seat belt retractor.