ION L4-2.4L (2007)
9. Install the rear carpet retainer by pressing until the trim clips engage.
10. Install the rearward clips of the front carpet retainer over the edge of the center pillar garnish molding.
11. Enable the SIR. Refer to SIR Disabling and Enabling.
Garnish Molding Replacement - Center Pillar Upper
Garnish Molding Replacement - Center Pillar Upper
Removal Procedure
1. Remove the height adjuster knob for the seat belt webbing:
1. Insert a small awl into the hole underneath the knob and push.
2. Lift up on the bottom of the knob. Unsnap the top of the knob from the seat belt height adjuster.