ION L4-2.4L (2007)
Power Mirror Motor: Service and Repair
Motor Replacement - Power Mirror
Removal Procedure
1. Remove the mirror face.
2. Remove the mirror.
3. Remove the mirror motor attaching screws.
4. Remove the mirror motor from the mirror housing routing the electrical connector through the door opening.
Installation Procedure
1. Position the mirror motor to the mirror housing routing the electrical connector through the door opening.
Notice: Refer to Fastener Notice.
2. Install the mirror motor attaching screws.
Tighten the motor attaching screws to 3 N.m (27 lb in).
3. Install the mirror face.
4. Install the mirror.
