ION L4-2.4L (2007)
Sunroof / Moonroof Panel: Service and Repair
Sunroof Window Replacement
Removal Procedure
1. Slide the sunshade rearward.
Notice: In order to prevent damage to the paint, mask the roof panel in front of the sunroof opening using masking tape and paper.
2. Cycle the sunroof window to the vent position.
3. Remove the sunroof window screws (1) from the window.
Important: Do NOT scratch the roof surface or the sunroof window.
4. Lift the sunroof window from the sunroof opening.
Installation Procedure
1. Position the sunroof window into the opening.
2. Ensure that the window trade mark is to the rear of the opening and that sunroof window attachment tabs are to the inboard side of the mounting
arms.
Notice: Refer to Fastener Notice.
3. Install the sunroof window screws (1) to the window. Do not tighten the screws.