ION L4-2.4L (2007)
4. Position the seat back forward to expose the lower J-hook retainer on the seat back trim cover.
5. Disconnect the J-hook retainer.
6. Position the seat back rearward and pull the trim cover out from between the seat back and the cushion.
Notice: Use care when disengaging the hook and loop fasteners. The hook end may pull from the seat foam pad, requiring foam pad replacement.
7. Pull the seat back trim cover up. Carefully disengage the hook and loop retainers until the head restraint guides are exposed.
8. Remove the guides from the seat back by squeezing the locking tabs. Pull the guides from the seat back.
9. Pull the trim cover up and off of the seat back.