ION L4-2.4L (2007)
5. Install the bolts to the seat cushion frame.
Tighten the bolts to 12 N.m (106 lb in).
6. Install the rear J-hook retainer. Ensure that the cable is beneath the material flap on the trim cover.
7. Install the seat adjuster handle.
8. Install the front seat.
Seat Back Recliner Handle Replacement - Front (Non-Fold Flat)
Seat Back Recliner Handle Replacement - Front (Non-Fold Flat)
Removal Procedure
Pull to remove the recliner trim handle from the recliner handle.
Installation Procedure