ION L4-2.4L (2007)
5. Disconnect the J-hook retainers from the seat cushion trim cover.
6. Carefully pull the trim cover out from between the cushion and the seat back and the adjusters.
7. Remove the trim cover and pad from the seat cushion.
Notice: Use care when disengaging the hook and loop fasteners. The hook end may pull from the seat foam pad, requiring foam pad replacement.
8. Carefully remove the trim cover from the pad by disengaging the hook and loop retainers.
Caution: Replace the passenger presence system as a complete assembly to prevent possible injury to the occupant. All the components in
the service kit are assembled and calibrated as a unit. Using only some of the components in the service kit will cause the passenger
presence system to operate improperly.
9. If replacing the front passenger seat cushion, you must also replace the inflatable restraint passenger presence system. Refer to Inflatable Restraint
Passenger Presence System Replacement - Front (without Heated Seat).
Installation Procedure