ION L4-2.4L (2007)
2. Install the brake pressure modulator assembly bracket mounting nut and mounting bolts.
^
Tighten the nut to 25 N.m (18 lb ft).
^
Tighten the bolts to 25 N.m (18 lb ft).
3. Secure the forward lamp wiring harness retainer to the BPMV bracket.
4. Install the brake modulator assembly to the bracket.
5. Tighten the 2 brake pressure modulator assembly insulator nuts (1).
Tighten the nuts to 8 N.m (71 lb in).
6. Secure the EBCM wiring harness retainer to the BPMV bracket.
