ION L4-2.4L (2007)
5. Install the engine front cover to water pump bolt.
Tighten the bolt to 25 N.m (18 lb ft).
6. Position the engine mount bracket to the engine.
7. Install the engine mount bracket bolts in the following locations.
^
The long bolts in the forward and lower rear holes
^
The short bolt in the upper rear hole
8. Tighten the engine mount bracket bolts in the following sequence.
1. Upper rear
2. Lower rear
3. Forward
Tighten the bolts to 50 N.m (37 lb ft).