ION L4-2.4L (2007)
3. Install the mode cable. Make certain that the cable is properly seated in the notch in the HVAC module.
Notice: Refer to Fastener Notice.
4. Install the mode cable screw.
Tighten the screw to 2 N.m (18 lb in).
5. Install the HVAC control assembly.
6. Install the HVAC control assembly screws.
Tighten the screws to 2.5 N.m (22 lb in).
Important: Do not bend the mode and temperature cables.
7. Connect the mode and temperature cables to the HVAC control assembly.
