ION L4-2.4L (2007)
2. Unsnap the defroster duct from the HVAC module and cross car beam. Bend the cluster wire harness tab on the cross car beam in order to remove
the duct.
Installation Procedure
1. Align the defroster duct with the HVAC module and snap into place.
2. If the cluster wire harness tab on the cross car beam was bent during removal, bend the tab back into position.
3. Install the I/P retainer.
Side Window Defogger Outlet Duct Replacement - Left Side
Side Window Defogger Outlet Duct Replacement - Left Side
Removal Procedure
1. Remove the defroster grille and place face down on a clean surface.
