ION L4-2.4L (2007)
8. Reposition the heater inlet hose clamp at the heater core using SA9111E.
9. Remove the heater inlet hose from the heater core.
10. Position the hose upright against the front of dash.
11. Remove the condenser tube and evaporator hose from the thermal expansion valve (TXV).
12. Remove and discard the seal washers.
13. Raise the center floor outlet duct while pushing the floor ducts down to disengage the ducts.
14. Rotate the center floor outlet duct forward in the vehicle and pull down to disengage the duct from the HVAC module.
