ION L4-2.4L (2007)
Center Mounted Brake Lamp: Service and Repair
High Mounted Stop Lamp Replacement
Removal Procedure
Notice: Do not pull on the edges of the center high-mounted stop lamp cover. Damage to the cover may result. Slide your fingers between the cover and
the lamp, and carefully pull the cover down.
1. Remove the center high-mounted stop lamp cover.
2. Disconnect the electrical harness only if you are removing the center high-mounted stop lamp.
3. If you are removing the bulbs, twist the sockets out of the stop lamp. Remove the bulbs.
4. Remove the center high-mounted stop lamp retainer screws.
5. Remove the center high-mounted stop lamp from the vehicle.
Installation Procedure
Notice: Refer to Fastener Notice.