ION L4-2.4L (2007)
Turn Signal Switch: Service and Repair
Turn Signal Multifunction Switch Replacement
Removal Procedure
1. Remove the steering column trim covers.
2. Disconnect the multifunction turn signal switch harness connector.
3. Remove the multifunction turn signal switch retaining screws.
4. Remove the multifunction turn signal switch from the steering column.
Installation Procedure
Notice: Refer to Fastener Notice.
1. Install the multifunction turn signal switch to the steering column.
Tighten the multifunction turn signal switch screws to 2 N.m (17 lb in).
2. Connect the multifunction turn signal switch harness connector.
3. Install the steering column trim covers.
