ION L4-2.4L (2007)
Fuse Block: Service and Repair
Underhood Electrical Center or Junction Block Bracket Replacement
Underhood Electrical Center or Junction Block Bracket Replacement
Removal Procedure
1. Disconnect the negative battery cable.
2. Remove the cover from the underhood electrical center.
3. Remove the underhood positive battery terminal lug (1).
Important: Take note of the positioning of the positive battery cables before disconnecting the cables.
4. Disconnect the positive battery cables (2) from the underhood electrical center.
5. Remove the electric power steering (EPS) cable nut from the underhood electrical center.
6. Disconnect the EPS cable (3) from the underhood electrical center.
7. Release the engine wiring harness retainer (1), next to the engine control module (ECM). Reposition the wiring harness (2) toward the engine.