ION L4-2.4L (2007)
Notice: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with
battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
5. Disengage the side retaining tab in order to release the ECM (1) from the bracket.
Installation Procedure
Notice: Control module damage may result when the metal case contacts battery voltage. DO NOT contact the control module metal case with
battery voltage when servicing a control module, using battery booster cables or when charging the vehicles battery.
1. Install the ECM to the bracket until the ECM snaps into place.