ION L4-2.4L (2007)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor Replacement
Removal Procedure
Caution: Refer to Gasoline/Gasoline Vapors Caution.
1. Remove the fuel pump module.
2. Open the fuel pressure regulator retainers (1).
3. Slide the fuel pressure regulator out slightly from the module.
4. Using a small pick, disengage the fuel level sensor electrical connector retainer (1).
5. Disconnect the fuel level sensor electrical connector from the module cover.
6. Remove the fuel pressure regulator wire connector (2) from the fuel pressure regulator.
7. Remove the fuel pressure regulator.