ION L4-2.4L (2007)
Notice: Refer to Fastener Notice.
3. Install the EVAP canister and bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the EVAP canister harness electrical connector (2) to the vent solenoid valve.
5. Lower the vehicle.
Notice: Refer to Fastener Notice.
3. Install the EVAP canister and bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the EVAP canister harness electrical connector (2) to the vent solenoid valve.
5. Lower the vehicle.