ION L4-2.4L (2007)
8. Disconnect the fuel tank vent line quick connect fitting (2) from the fill pipe recirculation line.
9. Loosen the fuel fill hose clamp (3) at the fuel tank.
10. Remove the fuel fill hose from the fuel tank.
11. Cap or plug the fuel tank opening and vent line in order to prevent fuel loss and/or system contamination.
12. Remove the fuel fill hose/pipe.
Installation Procedure
1. Remove the caps or plugs from the fuel tank opening and vent line.
2. Install the fuel fill hose to the fuel tank. Align the "D" notch on the fill hose (1) with the "D" notch on the fuel tank (1).
Notice: Refer to Fastener Notice.
3. Tighten the fuel fill hose clamp (3) at the fuel tank.
Tighten the clamp to 4.5 N.m (40 lb in).
