ION L4-2.4L (2007)
Throttle Body: Removal and Replacement
Throttle Body Assembly Replacement
Removal Procedure
Notice: Do not use solvent of any type when cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as damage to the gasket
surfaces and throttle body assembly may result.
Use care in cleaning the gasket surfaces on the intake manifold and the throttle body assembly, as sharp tools may damage the gasket surfaces.
Notice: Do not use any solvent that contains Methyl Ethyl Ketone (MEK). This solvent may damage fuel system components.
Important: DO NOT prop open the throttle blade with the ignition key in the ON position as it may set a diagnostic trouble code (DTC).
1. Remove the air cleaner outlet duct.
2. Remove the intake manifold cover.
3. Disconnect the throttle actuator control (TAC) electrical connector (1).