ION L4-2.4L (2007)
3. Disconnect the horn switch and the inflatable restraint electrical connectors.
4. Remove the inflatable restraint steering wheel module.
Installation Procedure
1. Connect the horn switch connector.
Important: This vehicle is equipped with dual stage air bags, you will find 2 connectors. Match the right color connector to the right
color opening in the module.
2. Connect the inflatable restraint connectors.
3. Align the retaining pins on the inflatable restraint module with the steering wheel.
4. Push the inflatable restraint module to secure.
5. Enable the SIR system. Refer to SIR Disabling and Enabling.
6. After replacing the module, deploy the old module before disposal. If the module was replaced under warranty, fully deploy and dispose of the
module after the required retention period. Refer to Inflator Module Handling and Scrapping for proper disposal.
