saturn Workshop Repair Guides

Saturn ION L4-24L Workshop Service and Repair Manuals

Procedures|Page 12892 > < Procedures|Page 12890
Page 3
background image

3. Install the head lamp/turn signal switch to the SIR coil module assembly.
4. Install the headlamp/turn signal switch screws.

5. Verify the SIR coil is in the center position. Refer to Inflatable Restraint Steering Wheel Module Coil Centering.
6. Slide the SIR coil assembly on the steering column and snap into place.

7. Connect the wiper/washer harness connector to the SIR coil module assembly.
8. Connect the head lamp/turn signal harness connector to the SIR coil module assembly.
9. Connect the SIR coil harness connector to the SIR coil module assembly.

Procedures|Page 12892 > < Procedures|Page 12890