ION L4-2.4L (2007)
10. Mount the seat belt retractor pretensioner in the SIR deployment fixture with the seat belt webbing exiting through the top of the pretensioner. Use
the following mounting method.
1. Adjust and secure 2 of the SA9413NE arms to the deployment fixture, with the short slotted portions of the arms standing vertically and facing
toward the center of the deployment fixture.
2. To mount, use the proper size bolt and nut with washers in order to secure the seat belt pretensioner mounting hole between the 2 deployment
fixture brackets.
3. Securely tighten all fasteners prior to deployment.
11. Inspect the SA9207Z-A and the appropriate pigtail adapter for damage. Replace as needed.
12. Short the 2 SIR deployment harness (1) leads together using 1 banana plug seated into the other.
13. Connect the appropriate pigtail adapter (2) to the SIR deployment harness (1).
14. Extend the SIR deployment harness and adapter to full length from the deployment fixture.
15. Connect the seat belt retractor pretensioner connector to the adapter on the deployment harness.
Important: When deploying a seat belt retractor pretensioner, the rapid expansion of gas is very loud. Notify the people in the immediate
area that a seat belt retractor pretensioner will be deployed.
