saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Heated Oxygen Sensor 1 Replacement|Page 1376 > < Heated Oxygen Sensor 1 Replacement|Page 1374

ION L4-2.4L (2007)

Page 4
background image

3. If equipped with RPO M86, perform the following steps, connect the engine harness electrical connector (1) to the HO2S.
4. Install the CPA retainer (2).
5. Install the HO2S connector clip to the thermostat housing.

6. If equipped with RPO MN5, perform the following steps, connect the engine harness electrical connector (2) to the HO2S.
7. Install the CPA retainer.
8. Install the HO2S connector clip to the thermostat housing.

Heated Oxygen Sensor 1 Replacement|Page 1376 > < Heated Oxygen Sensor 1 Replacement|Page 1374