ION L4-2.4L (2007)
Power Window Switch: Service and Repair
Rear Side Door Window Switch Replacement
Rear Side Door Window Switch Replacement
Removal Procedure
1. Lift the pull cup liner.
2. Remove the pull cup screws from the door trim.
3. Using a small flat-bladed tool, pry the rearward end of the pull cup out of the door trim.
4. Pull rearward to disengage the forward pull cup hook from the door trim.
5. Disconnect the power window switch electrical connector.
6. Disengage the locking tabs that hold the power window switch in the pull cup.
7. Remove the switch from the pull cup.
Installation Procedure