saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Battery Current Sensor > < Battery Positive Cable Replacement (Battery to Underhood Junction Block)|Page 10947

ION L4-2.4L (2007)

Page 4
background image

8. Install the positive battery cable terminal (2) to the junction block stud.
9. Install the junction block nut (1).

Tighten the nut to 17 N.m (13 lb ft).

10. Install the positive battery cable to the forward lamp harness clip (3).
11. Install the junction block cover.
12. Connect the negative battery cable.

Battery Current Sensor > < Battery Positive Cable Replacement (Battery to Underhood Junction Block)|Page 10947