ION L4-2.4L (2007)
2. Install the strut to knuckle bolts and nuts.
Tighten the bolts and nuts to 120 N.m (89 lb ft).
Important: The torque sequence must be followed in the order that is listed.
3. Install the lower control arm ball stud to steering knuckle pinch bolt and nut.
1. First Pass: Tighten the nut to 50 N.m (37 lb ft).
2. Reverse nut 3/4 turn
3. Second Pass: Tighten the nut to 50 N.m (37 lb ft) plus 30 degrees.