ION L4-2.4L (2007)
Steering Gear: Service and Repair
Power Steering Gear Replacement
Power Steering Gear Replacement
Tools Required
SA91100C Tie Rod Separator
Removal Procedure
1. Turn the steering wheel to the straight ahead position and remove the key from the ignition.
2. Secure the steering wheel utilizing a strap to prevent rotation.
3. Raise and support the vehicle. Refer to Vehicle Lifting.
4. Remove the front wheels.
Important: Do not rotate the intermediate shaft once separated from the gear. Possible damage or a malfunction could occur.
5. Remove the steering gear to intermediate shaft pinch bolt and discard.
6. Disconnect the intermediate shaft from the steering gear.
7. Remove both steering gear outer tie rod to knuckle nuts and discard the nuts.