saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Seals and Gaskets, A/T > < A/T Controls -Transmission Control Module Information|Page 9453

ION L4-2.4L (2007)

Page 2
background image

1. Place the TCM (2) into the under hood junction block bracket (3).
2. Install the TCM electrical harness connector to the TCM.
3. Install the cover on the ECM and TCM.
4. Connect the negative battery cable.
5. Program the TCM. Refer to Control Module References for programming and setup information.

Seals and Gaskets, A/T > < A/T Controls -Transmission Control Module Information|Page 9453