ION L4-2.4L (2007)
7. Use a brass drift and a hammer in order to gently tap on the CV joint cage (1) until the cage is tilted enough to remove the first chrome alloy ball
(2).
8. Tilt the cage in the opposite direction in order to remove the opposing ball.
9. Repeat this process until all 6 balls are removed.
10. Position the CV joint cage (4) and the CV joint inner race 90 degrees to the centerline of the CV joint outer race (1).
Align the CV joint cage windows (3) with the lands of the CV joint outer race (2).
11. Remove the CV joint cage (4) and the CV joint inner race from the CV joint outer race (1).
