ION L4-2.4L (2007)
11. Connect the engine control module harness connectors (3, 4).
12. Connect the negative battery cable.
13. Install the underhood electrical center cover.
Transmission Mount Bracket Replacement - Rear
Transmission Mount Bracket Replacement - Rear
Removal Procedure
1. Remove the rear transaxle mount.
2. Remove the axle boot heat shield bolts.
3. Remove the axle boot heat shield.
4. Remove the rear transaxle mount bracket to transaxle bolts.
5. Remove the rear transaxle mount bracket from the transaxle.
Installation Procedure
