saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

ABOUT US
Sensors and Switches - Transmission and Drivetrain > < A/T Controls -Transmission Control Module Information|Page 10093

ION L4-2.4L (2007)

Page 2
background image

1. Place the TCM (2) into the under hood junction block bracket (3).
2. Install the TCM electrical harness connector to the TCM.
3. Install the cover on the ECM and TCM.
4. Connect the negative battery cable.
5. Program the TCM. Refer to Control Module References for programming and setup information.

Sensors and Switches - Transmission and Drivetrain > < A/T Controls -Transmission Control Module Information|Page 10093