saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 15960 > < Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 15958
Page 3
background image

For vehicles repaired under warranty, use the appropriate labor operation for the repair condition shown.

Disclaimer

Technical Service Bulletin # 06-08-64-020A

Date: 070119

Body - Front Door Glass Inop/Jerky/Uneven Motion

Bulletin No.: 06-08-64-020A

Date: January 19, 2007

TECHNICAL

Subject:
Front Door Glass Does Not Move Up or Down and/or Inoperative or Jerky/Uneven Motion (Inspect Window Regulator and Tighten Cam Bolt Torque)

Models:
2003-2007 Saturn ION

Supercede:

This bulletin is being revised to add the 2007 model year. Please discard Corporate Bulletin Number 06-08-64-020 (Section 08 - Body & Accessories).

Condition

Some customers may comment on either of the following conditions:

Condition 1: The front door glass does not move up or down and/or is inoperative.

Condition 2: The front door glass moves in an uneven or jerky motion.

Cause

Condition 1 may be caused by the window regulator sash channel being spread apart where it fastens to clips on the bottom of the door glass.

Condition 2 may be caused by a loose cam guide bolt.

Correction

Remove the door interior trim panel and inspect the window regulator and sash channel. Refer to Trim Panel Replacement - Side Front Door in SI.

Remove the water deflector. Refer to Water Deflector Replacement - Front Door in SI.

Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 15960 > < Body - Front Door Glass Inop/Jerky/Uneven Motion|Page 15958