L100 L4-2.2L VIN F (2001)
5. Install heater inlet quick connect to heater inlet pipe (closest to drivers side). Holding quick connect by black collar, slide onto heater pipe. When
quick connect engages heater pipe bead, collar will slide toward the front of dash and lock into position.
6. Verify proper engagement of quick connect by attempting to pull inlet hose off of heater pipe.
7. Install heater core outlet quick connect to heater outlet pipe (closest to passenger side). Holding quick connect by white collar, slide onto heater
pipe. When quick connect engages heater pipe bead, collar will slide toward the front of dash and lock into position.
8. Verify proper engagement of quick connect by attempting to pull outlet hose off of heater pipe.
9. Install heater hose assembly clamp (if removed).
10. Connect negative battery cable.
Torque:
Battery Terminal Bolts: 17 Nm (13 ft. lbs.)
11. Fill cooling system.