L100 L4-2.2L VIN F (2001)
Windshield Moulding / Trim: Service and Repair
Windshield Reveal Molding Replacement
Windshield Reveal Molding Replacement
Removal Procedure
Important: The windshield lower molding locator can only be replaced by removing the windshield and then removing and installing
new windshield moldings, upper and lower locator, and both "A" pillar moldings.
1. Remove the windshield. Refer to Windshield Replacement (See: Service and Repair).
2. Remove the lower locator windshield molding from the windshield.
3. Clean the old adhesive from the glass using isopropyl alcohol.
Installation Procedure
1. Install the windshield lower locator and upper reveal molding.
