L200 L4-2.2L VIN F (2002)
9. Slowly remove glove compartment bin tilting bin downward to expose BCM residing on top of glove box.
10. Remove BCM module from glove compartment by sliding module out of attaching slots.
11. Remove BCM harness connectors.
INSTALLATION
1. Install glove compartment bin partially into opening.
2. Secure BCM to glove compartment bin slots.
3. Install BCM harness connectors.
4. Route glove box lamp wiring harness through lamp opening and connect glove compartment lamp wiring harness to glove compartment lamp.
5. Snap lamp into glove compartment bin.
