L200 L4-2.2L VIN F (2002)
4. On wagon models, install the plastic retainers to the fascia next to the tail lamp.
5. Install the bolts from the rear wheelhouse panel to the fascia.
6. Install the plastic fasteners from the rear wheelhouse panel to the fascia.
7. Close the rear compartment lid or lift gate.
Rear Bumper Fascia Outer Support Replacement
Rear Bumper Fascia Outer Support Replacement
Removal Procedure
1. Remove the rear bumper fascia. Refer to Rear Bumper Fascia Replacement (See: ).
2. Remove the rivets from the fascia outer reinforcement.
3. Remove the fascia outer reinforcement from the fascia.
Installation Procedure