L200 L4-2.2L VIN F (2002)
1. Position the hinge to the vehicle.
2. Align the hinge with the marks made prior to removal.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the hinge to hinge pillar bolt.
Tighten the door hinge-to-hinge pillar bolts to 30 Nm (22 lb ft).
4. Install the door to hinge studs.
5. Install the reinforcement plates and nuts to the studs.
Tighten the door and reinforcement plate-to-hinge nuts to 30 Nm (22 lb ft).
